Logic pro x sample rate problem free
Logic Pro performs a real-time, native sample rate conversion. The native software sample rate conversion function matches the sample rate of any audio hardware, thereby allowing the playback of projects on virtually any audio system, even if the hardware is—in sample rate terms—not compatible.
Nothing is lost in the process. Contact the vendor for additional information. Check sample rate settings When using an external audio interface with Logic Pro, the sample rate for your interface should adjust automatically to match the sample rate of your project. Check the sample rate on your external interface Most external audio interfaces have an application usually accessible in System Preferences or in the Applications folder that you can use to view and change hardware settings, including the device’s sample rate.
Designate one device as the main clock source. See the documentation for your interfaces for more information. Freeze tracks Freeze any tracks in your project that have plug-ins. Check sync settings Check sync settings if you’re syncing other applications or devices to Logic Pro, or if you’re syncing Logic Pro to another application or device.
See the documentation for your application or device for more information. Bypass Reaktor Ensemble If your project includes a software instrument track with a Reaktor Ensemble that syncs its LFO to the song tempo, try bypassing or removing the plug-in from the track.
Use built-in audio If you’re using an external audio interface, try using the built-in audio on your Mac instead of the interface. Unplug your external audio interface from your Mac. Choose Built-in Output from the Output Device pop-up menu. Ok I got it. I set up a similar Logic session and tested different things. Two points: There’s really not much point at running at kHz unless you’re a professional working on a movie or video game – in which case you’d have a system that can support it.
If you want to go above 48 kHz, you should really invest in a quality USB 3. That will help with buffer sizes also. Improve this answer. Todd Wilcox Todd Wilcox I’m just trying to release my song into public. About audio interface: Focusrite Clarett 2Pre that I have does support a kHz sample rate for recording.
Using it everything sounds much better. EugenEray Ah I was confused because in an earlier comment you wrote that you weren’t using an external interface.
You’re probably going to find that no one wants to take delivery of kHz audio anyway, so at some point you’ll have to downsample it. I wouldn’t worry too much about anything higher than 96 kHz. The only reason to keep the sample rate high during processing is to avoid aliasing in nonlinear effects distortion, limiters And anyways most decent nonlinear effect plugins have an oversampled mode or use higher-order ODE algorithms, which is generally more effective than any oversampling , so they don’t need high DAW sample rates.
Add a comment. Maybe lower sample rates are worth trying also. I’d be ready to bet you wouldn’t be able to tell apart the final rendered results of 48 kHz and kHz with these plugins. In case you’re not so into DSP, here’s an analogy: processing at kHz is like quadroupling your car’s fuel tank volume because there’s a leak somewhere. That may, in a sense, solve a problem and increase the range, but it’s totally inefficient and in principle tackles the issue at the wrong spot.
Sign up or log in Sign up using Google. Sign up using Facebook.
Logic Pro X kHz sample rate problem – Music: Practice & Theory Stack Exchange.Subscribe to RSS
Press J to jump to the feed. Press question mark to learn the rest of the keyboard shortcuts. Jan 21, · Check the sample rate in Logic Pro. To check your project’s sample rate, choose File > Project Settings > Audio. If your project’s sample rate doesn’t match your interface’s sample rate, select the correct sample rate from the Sample Rate pop-up replace.meted Reading Time: 4 mins. Change this to Mono. 2. Change the volume of the Quick Sampler instrument to 0dB. In the “AMP” section, turn the Volume knob to 0dB. 3. Smoothen the transition between samples by changing the Attack of the instrument. Go to the “AMP” section and adjust the envelop to add a slight delay to the Attack (A). Jul 23, · Short answer: Your system doesn’t have the processing power to support kHz sample rate for the amp designer plugins. There might be other plugins that won’t work either. The way I figured this out is by changing the buffer size. Click on Logic Pro X -> Preferences -> Audio. Look for I/O Buffer replace.mes: Use transient markers to make selections. Set project tempo with selected audio. Edit and process audio in the Audio File Editor. Audio File Editor edit commands. Edit audio files with transient markers. Use the Audio File Editor Pencil tool. Trim or silence audio files. Remove DC offset. Set audio file levels.